Adhesive melt for splicing veneer Henkel AQUENCE FU 424 (former name DORUSTU 424) is a phenol-formaldehyde resin in powder form. The glue is stored for a long period of time. After drying, the glue becomes translucent. Adhesive melt Henkel AQUENCE FU 424, has a high content of binder. Long life time of ready glue — about 8 hours.
Adhesive melt Henkel AQUENCE FU 424 has the following characteristics:
| Technology | Phenol-formaldehyde resin |
| Type product | Adhesive for splicing veneer |
| Application | Structural bonding |
| Appearance | Translucent after drying |
Applications
- cross and longitudinal veneer splicing
Properties product
- Long-term powder storage
- Long life time of ready glue ~8 hours
- High content of binder
Instructions for using Adhesive melt Henkel AQUENCE FU 424
Recommendations for use and technical data
Before use, please read the safety Data sheet for information on safety precautions and safety recommendations. Precautions must always be taken. Please always follow the internal safety instructions. If necessary, contact Henkel for support.
Open time
| Open time at 20 °C: | |
|---|---|
| Consumption 100 g/m2, min | ~6 |
| Consumption 200 g/m2, min | ~15 |
Temperature and standard pressing time
| Pressing temperature, °C | Pressing time, min |
|---|---|
| At 80-90 °C | ≥5 |
| At 90-95 °C | ≥4 |
| At 95-100 °C | ≥3 |
| At 100-105 °C | ≥2,5 |
| At 105-110 °C | ≥2 |
| At 110-115 °C | ≥1,5 |
Necessary time of pressing: standard time, plus 1 minute for each mm of veneer thickness.
The working temperature of the adhesive and the workpiece must be at least +10 °C.
Working temperature
Depending on the type and thickness of veneer, 140-170 °C for splicing machines:
- With 0.8 mm veneer thickness: ~145 °C
- With 0.3 mm veneer thickness: 150-170 °C
Mixing
Ready-to-use adhesive mix:
- 1 volume part water: 10 kg water.
- 3 dimensional parts AQUENCE FU 424: 18 kg of AQUENCE FU 424
Preparation of adhesive mortar:
First, pour water into the mixing tank. Then add the glue powder until you obtain a creamy consistency without lumps. You can use any available mixing equipment.
Time life
Life time depending on ambient temperature, at 20°C: ~8 h
Usage
The edge of the veneer is covered with glue roller, and then the glue is dried. For drying veneer with fresh adhesive should be spread out like a fan.
Processing
Bonding veneers with adhesive prednnisone comes at the expense of thermoactivation in the press.
Clean up
Cleaning painting equipment from uncured adhesive residues, it is possible to produce cold or warm water. Hardened residues are removed mechanically.
Storage of adhesive melt Henkel AQUENCE FU 424
Storage life up to 9 months without significant loss of adhesive properties. The opened inner plastic bag must be tightly sealed to prevent the powder from coming into contact with moisture.
Related products
