It is a thermoplastic hotmelt adhesive based on synthetic resin and EVA.
Application areas:
UNIMELT 5600 is used in domestic and foreign profile wrapping machines, bonding PP and natural coating on MDF.
Technical specifications:
Color :Yellow Transparent Appearance :Granular
Viscosity :10000±1500 mPa.s (190ºC de spindle 29 50 rpm)
Softening Point :85±3ºC
Application:
Humidity in Product : 8–10% Humidity in Air : 65-75% Envrn. Temperature : >15 ºC Temperature of Tank : 180-200ºC
Temperature of Roller : 180-200ºC
Usage:
Environment temperature must be around 15°C during the application process. Adhesive must be applied to one surface of the material to be adhered. Air humidity should be % 65-75 and product humidity should be % 8-10.
Packaging:
20 kg. Paper Bag
Shelf life :
Shelf life is 12 months at room temperature (18-20 °C).
Recommendations:
On undesirable oil and dust surfaces, it prevents the formation of a strong bond and the desired strength cannot be obtained.
The temperature inside the adhesive thank should be considered, and be controlled frequently due to changes in weather & conditions. During season changes adhesive temperature must be measured by thermometer devices.
The temperature of the application surface and environment must be higher than 15ºC Otherwise, successful results cannot be achieved due to faster drying time.
Adhesive tank should be cleaned frequently. The amount of the adhesive, which is applied on the surfaces, can vary due to type of the materials. Some undesired results may occur such as over usage and inadequate usage. In these cases, glue setting should be applied.
In case of giving a pause, adhesive temperature must be binded at 100-110°C to keep performance higher and a prevent glue from burning.
